Trick or Treat Card

Supplies:

Instructions:

Cover the card front with the orange textured paper, and trim even with the edges.
Cut a 4 3/4"x6 1/4" rectangle of the black spider web paper and ink the edges. Cut a 2 1/4"x2 1/2" rectangle of the purple textured paper and adhere to the lower right side of the spider web paper.
Cut a 2"x2 1/4" rectangle of the green textured paper and ink the edges. Place the green paper on the purple rectangle and trace around it. Use an X-acto® knife to cut out the window.
Attach the spider punch-out to the web with foam tape. Add orange mini brads to the scary arrow punch-out and adhere with foam tape. Attach the spooktacular arrow below the scary arrow, as shown. Add bat brads near the window.
Adhere the embellished spider web paper centered on the orange card front with foam tape. Trim a piece of theTrick or Treat border punch-out to fit across the card and adhere as shown.
For the inside: Cut a piece of orange paper to 5"x6 1/2". Cut a strip of black from the web paper to 6 1/4"x1 1/2" and ink the edges. Adhere across the orange and add pen work around the edges.
Mat the trimmed green texture paper with purple. Add a small ribbon loop under the green mat, and add penwork around the edge. Glue black paper behind the pumpkin Brad Buddy™ and attach to the green paper. Attach the matted pumpkin to fill the window in the face of the card with foam tape.
Adhere a Boo Brad Buddy™ under the pumpkin, and attach an arrow punch-out pointing to the Boo with foam tape. Tie a small bow of yellow ribbon and adhere to the arrow with Zots™.