Glittered Snowflower Card


Glittered Snowflower Card
Designer: Teresa Welch


Click to Enlarge
     
Click to Enlarge

Supplies:

Instructions:

  1. For the card front: Turn the card with the fold on the left. Cut the large snowflakes piece to 4 3/4 x 6 1/4 and glue it centered on the card front. Cut the blue strip to 1 3/8 wide, and adhere a strip of the white felt snowflakes through the center. Adhere a nailhead to the center of each snowflake.
  2. Cut out two of the purple paper ribbon strips. Wrap a ribbon strip over the flakes 1 from each end of the blue strip, gluing the ends at the back. Mat the strip with white, then glue it to the card front, 7/8 from the fold.
  3. Stack a 2 snowflower over a 3 snowflower, then add a silver mini snowflake Brad Buddy to the center. Secure the layers with a white mini brad, then glue it to the upper center of the card front as shown.
  4. Cut out the blue striped tag and mat it on white. Cut out Let it snow and add foam tape to the back, then adhere it to the tag center. Add a nailhead to the tag over the printed brad, then glue the tag to extend from under the snowflowers, angled as shown.
  5. For the inside: Cut out the remaining snowflake strip. Wrap two more paper ribbon strips around it as before, then add a felt snowflake on the center of each ribbon.
  6. Cut out the I hope your holidays... tag and mat it on white. Glue it as shown, then adhere a felt snowflake to the upper right. Add nailheads to the centers of all the snowflakes and to the tag.
  7. In a well-ventilated space lightly spray the front and the card inside with glitter spray. Let dry.