Sign up for special offers and promos!
  • Option 1
  • Option 5
  • Option 3
  • Option 4
  • Option 2
  • Option 6
Sign up for special offers and promos!
 



Flat Tag Necklaces


Tessa Bundy

Get all the major supplies needed to make these projects with the Flat Tag Necklaces Bundle or you can order them separately.

Be Happy Necklace
By Tessa Bundy


Click to Enlarge

Designer Tip: To make application of transfers easier, lift the tags on foam tape and adhere to a piece of cardstock or other surface so that they are flat and do not move while you are working with them.

Supplies:

Instructions:

  1. Cut out the transfer words ("BE" and "Happy") and floral swirls. Then, following the instructions provided, soak pieces until transfer separates.
  2. Meanwhile, remove small dragonfly Dazzle and place on plastic protector or packaging. Color with violet metallic marker, allow to dry slightly, gently brush off some of the ink to allow the shine of the dazzle to come through, then allow to dry completely.
  3. Apply a small amount of Diamond Glaze to the rectangle tag and position the transfers, with BE at the top and Happy vertically below it. Apply small amount of Diamond Glaze to the circle tag and position swirls transfer toward bottom. Cut off the excess. Apply purple Dragonfly Dazzle to the top of the circle tag, over the swirls.
  4. Once you have positioned all elements allow to set a minute or so, then brush Diamond Glaze over the top to seal. (Apply Diamond Glaze under any loose edges and smooth down.) Allow to dry completely.
  5. When dry, apply purple crystals to the swirls and a heart charm to embellish.

Nametag Necklace
By Tessa Bundy


Click to Enlarge

Designer Tip: Practice with each Impress letter lightly on cardstock first to make sure it is oriented properly. For metal, hammer firmly 4-8 times directly over letter block onto a flat surface.

Supplies:

Instructions:

  1. Hammer the name, using impress set, into long rectangle tag, and year into the circle tag. Color over with violet metallic marker, making sure to get ink in the crevices of the letters. Allow to set a minute then smooth away excess ink with a tissue or paper towel, leaving violet in etched letters and a faded violet haze around the letters.
  2. Remove two swirl Dazzles and place on plastic protector or packaging. Color with violet metallic marker, allow to dry slightly, gently brush off some of the ink to allow the shine of the dazzle to come through, then allow to dry completely.
  3. Once dry, apply to the tags as embellishments, cutting apart to fit around the impress lettering. Add purple crystals to the swirls as a final embellishment.

Charming Floral Necklace
By Tessa Bundy


Click to Enlarge

Designer Tip: To avoid separating tags, cut a small notch at the edge of your transfer where the link at top and/or bottom will rest BEFORE soaking the transfer.

Supplies:

Instructions:

  1. Cut out the transfer shapes that fit the tags on the necklace medium flowers rectangle, small fern circle and tiny bud circle (or cut down other images to fit shapes). Cut a small notch at the edge of the transfers where the link at the top and/or bottom will rest. Then, following instructions provided, soak pieces until transfer separates.
  2. Apply a small amount of Diamond Glaze to the tag and position the transfer, sliding the link into the notch. Once you have positioned the transfer allow it to set a minute or so, then brush Diamond Glaze over the top to seal. (Apply Diamond Glaze under any loose edges and smooth down.) Allow to dry completely.
  3. When dry, apply red crystals to embellish.