Supplies:

• Patera™ 1 ¼” round Flat Tag
• Impress Set
• Diamond Glaze
• Decorative Words transfer sheet
• Foam tape
• Blue Metallic Pen
• 1 ¼” circle punch
• Self-healing mat or similar work surface
• Awl (optional)
• Hammer

Instructions

1. Using a 1 ¼” circle punch, punch the photo to fit the tag. Tape in place on your work surface. Using the impress set, stamp the word (H-O-P-E) across lower portion of the photo. Using metallic pens, color over each letter, immediately buffing off excess ink with a paper towel or Q-tip (ink will be left in the impression of the letters and as shading around outer edges).
2. Cut out a flower swirl from the transfer sheet and follow the included directions, soaking in water to remove backing and blotting dry. Apply a thin coat of diamond glaze to the top left portion of the photo and adhere the transfer in place.
3. Adhere the finished photo to the tag with a coat of diamond glaze. Punch a hole at the top with an awl, or snip at the top of the photo before adhering to the tag so it slips around center ring. Then apply a final coat of diamond glaze over the top of the tag to fix all the elements. Allow to dry completely.