Click here to zoom in

Supplies:

• Cardmaker's™ Ultimate Christmas Creative Pack: Red circles paper, green circles paper, retro dots paper
• Cardmaker's™ Christmas Clear & Frosted Overlays
• Cardmaker's™ Classic Ribbons: Red grosgrain ribbon
• red mini brads
• foam tape
• glue stick
• 5"x6 1/2" blank white card

Instructions:
For the Card Front :

1. Place the card with the fold on the left. Trim 1" off the right side of the card front and cover the remaining card front with red circles paper. Glue a 3 3/4"x6 1/4" piece of retro dots paper centered on the card front with the dots running vertically.
2. Mat a 3 3/8"x2" piece of green circles paper on red circles paper, trimming the mat to 1/16". Center the "Merry Christmas" overlay over the green circles paper and add a red mini brad to the top of the letter "i" to hold the overlay in place (a dab of glue stick behind the Santa hat will add extra reinforcement). Secure one end of a 1 1/2" length of red grosgrain ribbon behind the bottom right edge of the matted overlay with the ribbon pointing downward. Use foam tape to attach the overlay 1 1/4" from the top of the card.
3. Add a red mini brad to the top of the "Holiday Wishes" tag, then use foam tape to attach the tag over the loose end of the ribbon length.

For the Card Inside:

1. Cover the card inside with green circles paper. Mat the long edges of the retro dot border on red circles paper, trim the mats to 1/16", and glue 1/8" from the right edge of the card. Glue the slide mount artwork over the left portion of the card inside.