Designer's Tip: The pieces on this die are intricate. To make removal from the die easier, sandwich wax paper between the die and paper.
Instructions
- Place the card fold at the top. Cover the card with glimmer paper. Glue 6 1/2”x4 1/2” striped paper across the card center. Trace the Fancy Label shape onto the card center and cut out. Ink the edges of the label cut out black.
- Die cut the Lattice from glimmer paper and glue inside the card front, centered in the label window. Cut a 2 1/4” flower from red flourish paper and 1 1/2” flower from glimmer. Foam tape to the lower left corner of the window.
- Print the tiny blue download tag and place “hello” Dazzles™. Punch with 1/16” punch and thread with twine. Knot the ends and glue under the flowers on the lower left corner of the card.
- Inside: Cover the card inside back with glue flourish paper. Glue 6 1/2”x5/8” striped paper across the bottom. Glue a 6 1/2” x1/4” strip of glimmer across the top of the border. Glue 1 1/2” glimmer paper flower to the left side. Place “Thinking of you” Dazzles™ on the black border. Place a large dot of red glitter glue at the center of each Onyx Glimmer flower and let dry.
|
|
