Click to view a larger image
|
- Using a 1 ¼” circle punch, punch the photo to fit the tag. Tape in place on your work surface. Using the impress set, stamp the word (H-O-P-E) across lower portion of the photo. Using metallic pens, color over each letter, immediately buffing off excess ink with a paper towel or Q-tip (ink will be left in the impression of the letters and as shading around outer edges).
- Cut out a flower swirl from the transfer sheet and follow the included directions, soaking in water to remove backing and blotting dry. Apply a thin coat of diamond glaze to the top left portion of the photo and adhere the transfer in place.
- Adhere the finished photo to the tag with a coat of diamond glaze. Punch a hole at the top with an awl, or snip at the top of the photo before adhering to the tag so it slips around center ring. Then apply a final coat of diamond glaze over the top of the tag to fix all the elements. Allow to dry completely.
|