Designer Tip:To prevent spattering when misting, hold the mister nozzle about 12” from the card surface (make sure to cover work surface). Mist once over the card, allowing the mist to fall onto the card instead of spraying the card directly. Repeat until the desired color intensity is achieved.
- Card Front: Place the card fold at the top. Tape the template over the card and use the squeegee to apply Artist Spackle over the template. Scrap off any excess Spackle and return to the jar. Let dry for 15 minutes. Tape just the first row of circles to the card bottom by aligning the top of the template along the bottom of the card. Apply Spackle and let dry.
- Open the card and lay flat. Use scrap paper to cover the left side of the card, or the card back, to protect the card. Mist with Fuchsia several times and let dry. Once the card is dry the Spackled circles will be a different shade of pink. Lightly mist White Linen across the card from bottom left to upper right corner. Let dry. The opaque white will only show if misted when the card is completely dry.
- Mist a large paper flower with Dirty Martini (green) and a medium with Fuchsia. Let dry, then Zot to the top left corner. Zot a gold/pearl button to the flower center. Cut three 3”-4” long green lattice ribbons. The ends will naturally coil on their own. Glue under right side of flower. Glue a length of green rick rack across the card, 3/4” from the bottom. Punch the label from white cardstock and the oval from lime green. Foam tape to the right side of the rick rack. Personalize with a white Dazzles™.
- Inside: Mist the single row of template circles with Fuchsia and let dry. Glue a length of rick rack across the card, 1 1/4” from the card bottom. Punch the label from lime green and the oval from white and foam tape over the right side of the rick rack. Place a gold Dazzles™ sentiment on the oval.