Designer's Tip: This card utilizes most of the papers in the Honeysuckle Artful Card Kit—they all work together so well!
- For the Front: Place the card with the fold on the top. Draw a line from the top right corner to the bottom left corner. Cover the top left half with white multi-pattern paper by gluing the paper down along the line, then trimming along the top and left edges of the card. Cover the remaining half with black dot, using the same technique.
- Cut a 1" x 5" rectangle from the following papers: red, pink, green, and black floral. Cut each rectangle on the diagonal from corner to corner, creating 8 narrow triangles. Glue one of the triangles along the diagonal on the card on the white half, with the wide end of the triangle going off the card. Glue a black floral triangle just below the green. Glue the pink triangle above and the red below, as shown. Glue the remaining corresponding triangles along the bottom left area, reversing the order of colors, as shown. Trim off the excess of the triangles along the edges of the card. Ink the edges black.
- Punch out the black hexagon border and cut it down to 6 1/2" long. Thread the 3/4" wide green crepe ribbon through the holes, attaching the ends to the back of the border. Foam tape this along the bottom of the card, 1/4" from the bottom. Punch out a black leafy die cut and glue to the top left of the card as shown. Glue a red swirl to the bottom right as shown. Punch out the large pink/red label and foam tape it to the center of the card. Cut out the "Thanks a Bunch!" greeting and mat on white cardstock with a 1/16" border. Foam tape it to the center of the pink/red label. Tie a bow with green crepe ribbon and Zot™ it to the top right of the label.
- For the inside: Take the white patterned paper and make a mark 6 1/4" along the top edge from the top left corner. Make another mark 3" from the same corner along the left edge. Cut from mark to mark, creating a large triangle. Ink the top and left edges with black Stazon and a cosmetic sponge. Glue this to the top left of the card. Use this same technique to cut a black floral triangle with the same dimensions, this time gluing the triangle to the bottom right of the card. Cut 8 1/2" x 2" of black dot and glue across the remaining white space, trimming off any excess. Ink all edges. Glue a red swirl die cut in the top left corner, 1/2" from the top and left. Glue a green/pink label die cut in the center. Cut out "You're So Sweet" and glue it to the center of the label. Glue the large red/pink flower swirl die cut overlapping the bottom right corner of the label as shown.