Birthday Wishes
Project: Card
Supplies:
- Disney Princess Finished in a Flash!(tm)
- 5"x6 1/2" blank white card
- craft knife, cutting mat 
- small Zots(tm)
Instructions:
1) Place the card with the fold on the left. Cover the card front with blue bordered paper, placing the striped border at the bottom and leaving the top left corner unglued. 
2) Place the card front on a cutting mat and cut a 2 1/2"x2" window in the top portion. Attach three starburst brads to the top left corner of the card front, surrounding the window, then finish gluing the corner of the paper.
3) Attach a gold crown brad to the top left corner of the "A dream is a wish..." punch-out, then glue the punch-out below the window. Glue the Cinderella punch-out in the bottom right corner of the card front.
4) Inside: Cover the card inside with pink floral paper. Add the brads to the carriage Brad Buddy(tm), then Zot(tm) it to the card inside so it's centered in the window when the card is closed.
5) Computer journal on the blank pink oval punch-out. Mat on blue paper and add a starburst brad to the bottom left corner. Glue the label below the carriage. Zot(tm) a knot of blue ribbon to the top right edge of the label.


Mickey Says...
Project: Card
Supplies:
- Disney Magic Kingdom Finished in a Flash!(tm)
- 5"x6 1/2" blank white card
- black pen
- black ink pad
- foam tape
Instructions:
1) Place the card with the fold on the left. Cover the card front with green paper, placing the striped corner in the bottom left and leaving the top left corner unglued. Ink the edges of the card front.
2) Add three mouse head brads down the top left corner of the card front, then finish gluing the paper in place. Write "Mickey says..." next to the brads. Add the brads to the Mickey Brad Buddy(tm) and Zot(tm) it centered on the card front.
3) Computer journal "congratulations!" on the blank red label punch-out. Fold a short length of black ribbon in half and glue the loose ends behind the tag's tab. Glue the label centered at the bottom of the card front. Ink the edges of a star punch-out and foam tape it to the left end.
4) Inside: Cover the card inside with green paper. Computer journal "You did it!" on the blue Mickey tag punch-out. Add a tab of folded black ribbon to the top of the tag and glue to the top of the card inside. Ink the edges of red, blue and green star punch-outs and glue them to the tag. Glue a white glove and word fragment punch-outs to the bottom of the card inside.


White Glove Area
Project: 12"x12" page
Supplies:
- Disney Magic Kingdom Finished in a Flash!(tm) 
- yellow cardstock
- black cardstock
- white cardstock
- black ink pad
- foam tape
Instructions:
1) Place the red paper with the Mickey and Minnie border at the bottom. Double-mat one vertical photo on yellow, then black cardstock and glue to the left side of the page. Foam tape the "White Glove Area" punch-out to the top, a white glove punch-out in the bottom left corner and the "Fun!" punch-out below the photo.
2) Glue another vertical photo on yellow cardstock. Computer journal a horizontal strip on white cardstock and ink the edges, then attach below the photo with red brads. Trim the yellow cardstock even with the edges of the journaling. Mat the whole piece on black cardstock and glue to the right side of the page.


Disneyland Resort
Project: 12"x12" page
Supplies: 
- Disney Magic Kingdom Finished in a Flash!(tm)
- yellow cardstock
- black cardstock
- white cardstock
- foam tape
- small Zots(tm)
Instructions:
1) Place the blue paper with the Mickey squares border at the top. Glue a Mickey border punch-out across the bottom of the page. Foam tape a Mickey tile punch-out to the left end of the border.
2) Double mat a 7"x5" photo on yellow, then black cardstock and glue centered on the page. Glue the "Disneyland Resort" punch-out to the top right corner of the photo and attach the Mickey Brad Buddy(tm) to the bottom right corner.
3) Add a mouse head brad to the blank green tag punch-out and glue it so the tab overlaps the left edge of the photo. Zot(tm) a bow of red ribbon to the tag's tab. Computer journal the year in blue on white cardstock. Mat the year on black cardstock and glue tucked under the bow.


Walt Disney World: Left Page
Project: 12"x12" page
Supplies:
- Disney Magic Kingdom Finished in a Flash!(tm)
- white cardstock
- red cardstock
- blue cardstock
- black pen
- foam tape
Instructions:
1) Place the green paper with the colored corner in the top left. Double-mat a vertical photo on white, then red cardstock and add a mouse head brad to the top right corner. Glue the photo to the top of the page and add the sign post punch-out to the left side. Glue the "Walt Disney World" punch-out to the right and the "Vacation Tips" punch-out below. 
2) Mat a horizontal photo on blue cardstock and add a mouse head brad to the top right corner. Glue the photo to the bottom of the page and add a bracket punch-out to each side.
Click here to see the companion page.


Walt Disney World: Right Page 
Project: 12"x12" page
Supplies:
- Disney Magic Kingdom Finished in a Flash!(tm)
- white cardstock
- red cardstock
- blue cardstock
- black pen
- foam tape
Instructions:
1) Place the green paper with the colored corner in the bottom right. Double-mat a vertical photo on white, then red cardstock and glue in the top left corner of the page. Foam tape the Dumbo punch-out in the bottom right corner.
2) Mat a horizontal photo on blue cardstock and glue in the bottom left corner of the page. Foam tape the carousel horse punch-out in the bottom left corner.
3) Glue a small horizontal photo to blue cardstock. Computer journal a horizontal strip on white cardstock and glue below the photo. Add two mini brads to the left end of the journaling. Trim the blue cardstock even with the edges of the journaling and glue in the top right corner of the page. Foam tape star punch-outs around the journaling.
4) Attach the "Fantasy Land" punch-out in the bottom right corner of the page with yellow brads. Attach the castle Brad Buddy(tm) above the punch-out.
Click here to see the companion page.


Snow White
Project: 12"x12" page
Supplies:
- Disney Princess Finished in a Flash!(tm)
- white cardstock
- light blue cardstock
- black ink pad
- scallop edge scissors
- corner rounder punch
- foam tape
- small Zots(tm)
Instructions:
1) Trim 3/4" off the bottom edge of the yellow floral paper, then ink all the edges. Cut a scallop edge along one long edge of a 12" strip of white cardstock, then glue behind the bottom of the floral paper. Glue a strip of light blue cardstock behind the bottom of the floral paper to complete the 12" background. Ink the edges of the cardstock.
2) Double-mat a 6 1/4"x9" photo on white, then light blue cardstock, inking the edges of each mat. Computer journal the place and date on white cardstock, then round both bottom corners and ink the edges. Glue the journaling behind the top right edge of the photo, then glue the photo to the left side of the page.
3) Double mat a square photo on light blue, the white cardstock, inking the edges of each mat. Computer journal on white cardstock, round both bottom corners and ink the edges. Glue the journaling behind the bottom edge of the photo. Fold a length of blue ribbon in half and attach the loose ends behind the top of the photo. Add a yellow mini brad to the ribbon. Glue the photo at an angle in the bottom right corner of the page. 
4) Run blue ribbon across the bottom of the page and secure the ends to the back side. Add a yellow brad to each ribbon end. Foam tape Snow White and apple punch-outs, glue the "The fairest one of all" punch-out and add a starburst brad to the left of the square photo.
5) Ink the edges of "Snow White" and dwarves punch-outs and foam tape them in the top right corner of the page.


Cinderella: Left Page
Project: 12"x12" page
Supplies:
- Disney Princess Finished in a Flash!(tm)
- white cardstock
- pink cardstock
- foam tape
- small Zots(tm)
Instructions:
1) Place the blue paper with the striped border at the bottom. Double-mat a 5"x7" photo on pink, then white cardstock and glue in the top left corner of the page. Glue the "Cinderella" punch-out to the bottom right corner. Add a gold crown brad to a blank blue tag punch-out and glue it in the top right corner of the photo. Zot(tm) a bow of pink ribbon to the tag's tab.
2) Computer journal a vertical block on white cardstock leaving extra space at the bottom. Foam tape a small photo in the extra space and add three mini brads to the left. Glue the journaling to the right side of the page and Zot(tm) a bow of pink ribbon to the top edge. 
3) Add the carriage Brad Buddy(tm) to the printed page border, just below the journaling.
Click here to see the companion page.


Cinderella: Right Page
Project: 12"x12" page
Supplies:
- Disney Princess Finished in a Flash!(tm)
- white cardstock
- pink cardstock
- foam tape
Instructions:
1) Place the blue paper with the striped border at the bottom. Mat a 7"x5" photo on pink cardstock. Mat again on white cardstock, leaving the right edge 2" wide. Attach the "Dreams do come true" punch-out to the top of the large right edge with a pink brad, then foam tape the Cinderella punch-out below. Glue the photo to the top of the page and add a pink crown brad above the top left corner.
2) Computer journal a horizontal strip on white cardstock and glue below the right side of the photo. Add three mini brads along the bottom of the journaling. 
3) Glue the glass slipper punch-out to the left of the journaling and accent with a starburst brad.
4) Fold a length of pink ribbon in half and secure the loose ends behind the top of the mouse punch-out. Foam tape the punch-out to the right side of the printed page border.
Click here to see the companion page.


Under the Sea
Project: 12"x12" page
Supplies:
- Disney Princess Finished in a Flash!(tm)
- blue cardstock
- light blue cardstock
- teal cardstock
- foam tape
Instructions: 
1) Place the blue dotted paper with the bubbles in the bottom right corner. Double-mat a 5"x7" photo on blue, then teal cardstock and glue to the right side of the page. 
2) Mat two square photos on light blue cardstock and glue to the left side of the page.
3) Foam tape Ariel and Flounder punch-outs to the left of the square photos. Foam tape the "under the sea" punch-out in the bottom right corner of the large photo and add two brads below. Attach the blue bubbles tag punch-out to the top left edge of the large photo. Add a blue mini brad to the tab and foam tape the sea star punch-out to the tag.


Once Upon a Dream
Project: 12"x12" page
Supplies:
- Disney Princess Finished in a Flash!(tm)
- gold cardstock
- lavender cardstock
- foam tape
- small Zots(tm)
Instructions: 
1) Place the pink paper with the floral corner in the bottom left. Glue the lavender border punch-out across the top of the page.
2) Double-mat a 5"x7" photo on gold, then lavender cardstock and glue to the left side of the page. Glue corner punch-outs over each corner of the photo and add two starburst brads to the left.
3) Mat a small photo on lavender cardstock and glue in the top right corner of the page. Zot(tm) a bow of yellow ribbon to the right edge.
4) Add the crown Brad Buddy(tm) below the small photo. Attach the "Once upon a dream" punch-out below the crown with two pink brads, then foam tape the purple floral punch-out below that.