Click to view a larger image
|
- Place a 1" square of pink metal over the design on the skinny mold with the silver side up. Use the stump to impress the design, use the refining ends of the wheel tools for detail.
- Remove the metal from the mold and place on an acrylic mat. Smooth the edges of the metal and finish refining as needed.
- Trim the metal to a ¾" oval, with the design at the center. Sand over the design so the embossed areas are silver. Attach to the inside of the ring with adhesive, lightly pressing the corners in place.
- Squeeze the diamond glaze onto center, allowing it to fill the square to the top (Keep the nozzle beneath the surface of the glaze in the square to prevent bubbles. If you do get a bubble, simply touch your fingertip to it to remove it). Place flat to dry, at least overnight.
|