Designer Tips: The embellishments used on this card (those not listed below) can be found in the kit created for this webisode.
Instructions:
- For the card front: Turn the card with the fold at the top. Cut 6¼"x4¾" Winter Delights green paper with the swirl design at the lower left. Glue felt rickrack across the paper, ½" from the lower edge, then glue the paper centered on the card. Punch out the snow scene die-cuts and follow package directions to assemble, placing foam tape between layers. Foam tape to the card, positioned over the rickrack upper edge as shown. Place “Greetings” Dazzles™ at the upper right and the jewel Dazzles™ as shown.
- For the inside: Cut 5 3/8"x4" Winter Delights green paper with swirls along the bottom and glue centered on the inside. Punch out the snowman die-cuts and glue piece #1 at the lower right. Foam tape pieces #2 and #4 to the first piece, then place “Merry Christmas” Dazzles™ as shown.
|
|
