Designer Tips: The embellishments used on this card (those not listed below) can be found in the kit created for this webisode.
- For the card front: Turn the card with the fold on the left and cover with Winter Delights blue snowflakes paper. Cut 5"x2½" Winter Delights blue dotted paper and 5"x1" Winter Delights striped paper. Glue the striped piece along the bottom of the dotted piece. Glue blue sheer ribbon across it as shown, gluing the ends to the back. Wrap and tie a 3" ribbon around the first piece, 1 3/8" from the right edge, then glue to the card as shown.
- Cut a 2¾"x5 1/8" Color Me™ snowflakes paper and place on the craft sheet. Rub the ocean ink pad over it and wipe off the excess. Rub the lagoon ink pad over the paper and wipe off the excess. Round the two lower corners, then mat on white paper with 1/16" borders. Wrap thread over the piece three times, ½" from the upper edge, and knot at the back. Glue to the front, aligning the upper edges. Hold two threads together and tie a bow, then glue as shown.
- Punch out the blue foil snowflake die cuts and follow the package directions to assemble, placing foam tape between layers. Glue to the front as shown. Cut out “blessings” acrylic art and glue at the lower right. Punch out and glue a small foil snowflake over the right end, then place the pearls as shown.
- For the inside: Cover the inside with Winter Delights blue snowflakes paper. Cut two 5"x 7/8" Winter Delights striped papers and glue along the upper and lower edges as shown. Trace and cut a lacy label from Color Me™ swirls paper. Ink and mat as before, then glue centered on the inside. Cut out the acrylic tag and sentiment and glue as shown. Punch out and glue two snowflakes as shown. Tie a thread bow and glue to the tag top, then place pearls as shown.