Designer Tips: The embellishments used on this card (those not listed below) can be found in the kit created for this webisode.
- Download the Nature’s Watercolors tags. Copy and size the tan tag to 2½" tall and the scalloped label to 4¾" wide. Print on white paper and cut out.
- For the card front: Turn the card with the fold at the top and cover the front with Nature’s Watercolors striped paper. Ink the edges. Cut 3"x5" Nature’s Watercolors squares paper, ink the edges, and mat the left long edge on cardstock with a 1/8" border. Glue brown grosgrain ribbon 5/8" from the border, with the ends glued to the back. Glue the squares paper to the card, 5/8" from the right edge. Cut 5"x1¼" Nature’s Watercolors tan paper and cut one end in a “V.” Ink the edges and glue to the card, aligning the straight end with the right edge of the squares paper, ¾" from the card bottom.
- Place Dazzles™ ferns in a cluster radiating from the ribbon and banner as shown. Print the greeting onto the Nature’s Watercolors tag. Mat on cardstock with 1/16" borders, then foam tape over the ferns as shown. Place small fern Dazzles™ on the tag as shown. Follow the manufacturer’s directions to make a square epoxy shape using a brown square from the Nature’s Watercolors squares paper. Place as shown. Glue a button to the tag, then hold two threads together to tie a bow and glue to the button.
- For the inside: Cut 6½"x4" Nature’s Watercolors tan paper, ink the edges, and glue to the inside. Cut 1¼"x5" Nature’s Watercolors striped paper and ink the edges. Mat the left long edge on cardstock with a 1/8" border. Knot the brown ribbon in the center and glue 1½" from the upper end, gluing the ends on the back. Glue to the inside along the left edge. Print the sentiment on the Nature’s Watercolors label, then glue to the inside. Glue a button on each end, then tie two thread bows and glue one to each button.