Designer Tips: The embellishments used on this card (those not listed below) can be found in the kit created for this webisode.
- For the card front: Turn the card with the fold at the top and cover the front with Nature’s Watercolors corner paper, positioning a lace edge at the top. Ink the edges. Cut 1½"x5" Nature’s Watercolors striped paper, ink the edges, and mat the long sides on dark green cardstock with 1/16" borders. Glue natural rickrack 3/8" from the right edge, gluing the ends on the back. Glue the border to the front as shown.
- Trace and cut fancy label A from green cardstock, then cut fancy label B from the center. Trace fancy label A onto tan cardstock, then cut 1/8" inside the lines. Foam tape the green frame to the tan label, then place “Season of Joy” Dazzles™ as shown. Glue to the front in the lower left corner. Punch out the cardinal die-cuts. Follow the package directions to assemble with foam tape between the layers, using #1, #2, #3, and #5. Glue and foam tape to the card as shown.
- Punch out #3 die-cut from the “Merry Christmas” set, then cut off the leaf that extends upward. Glue the 3-leaf set to the frame at the lower left, then foam tape the single leaf over them, along with berries #4 from the same set as shown. Place jewel Dazzles™ as shown.
- For the inside: Cut 5"x4" Nature’s Watercolors corner paper, ink the edges, and mat on green cardstock with 1/16" borders. Glue rickrack near the lower edge, gluing the ends on the back, then glue the piece centered on the inside. Place the birdcage Dazzle™ on dark green cardstock and cut around the edges. Glue as shown. Punch out “Merry Christmas” label die-cuts #1 and #2 and assemble with foam tape between the layers. Glue to the inside and place Dazzles™ as shown.