Tip: Practice with the punch on scrap paper to make sure your edges are punched evenly. My holly clusters are about 15/16" apart.
Instructions:
- For the card front: Turn the card with the fold at the top. Open it and trim ¾" from the lower front edge. Cut green snowflakes paper to fit the front with the corner design at the upper right and glue. Ink the edges.
- Cut three green iridescent holly leaves and punch three 5/8" red iridescent berries. Ink the edges, then glue as shown, using foam tape to secure the center leaf. Transfer a “Merry Christmas” Dazzles™ to blue cardstock and cut to 3¾"x¾". Mat on white paper with 1/16" borders and glue to the front at the lower left.
- For the inside: Cut a 4¾"x7" blue snowflakes paper. Use the border punch with the A guides to punch holly leaves along the lower long edge. Cut a 7"x 7/8" blue iridescent paper and glue behind the punched side to extend 1/8" beyond the edge. Trim to 6½"x 5", ink the edges, and glue to the inside.
- Cut a 5¼"x3¼" green snowflakes paper, positioning the remainder of the corner design at the upper right. Ink the edges and glue centered above the punched border. Print the sentiment in dark blue on light blue cardstock and cut to 2 7/8"x2". Mat on white paper with 1/16" borders, then glue to the green snowflakes piece as shown. Cut two green iridescent holly leaves and punch a 5/8" red iridescent berry. Ink the edges and glue as shown.
|
|
