Friend
Project: Card
1) Place the card with the fold on the left, cover the card front with red flourish paper and ink the edges. 
2) Mat the long edges of a 7/8"-wide strip of red/black striped paper (stripes running vertically) on black glimmer. Ink the edges of the "Delight, Joy" punch-out, glue it over the left end of the strip and add a black arrow brad to the right end of the punch-out. Glue the strip across the top of the card front, trimming the excess paper even with the right edge of the card.
3) Mat the long edges of the "friend" definition punch-out on red/black striped paper. Slide the tan slide punch-out onto the right end of the matted border, then attach a red silk flower in the center of the slide with a black mini brad. Glue the strip across the bottom of the card front. 
4) Layer a black silk flower on top of a tan flower and add a red painted brad to the center. Add a tan mini brad to the right end of the "Sharing, Love" punch-out. Foam tape the "Sharing, Love" and "Laughter, Comfort" punch-outs and Zot(tm) the layered flowers between the two strips on the card front.
5) Inside: Mat the top edge of a 1 1/4"-wide strip of red/black striped paper on black glimmer. Glue the strip across the bottom of the card inside and foam tape the "friendship" punch-out overlapping the top right edge.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- 5"x6 1/2" blank white card
- black ink pad
- foam tape
- small Zots(tm)


Thinking of U
Project: Card
1) Place the card with the fold on the left and cover the card front with tan script paper. Glue a 1 1/2"-wide strip of tans striped paper (stripes running vertically) even with the bottom edge of the card, trimming the excess even with the card edges. Ink the edges of the card front. Trim the black border punch-out to 5" long. Add 4 tan mini brads and a white silk flower, attached with a tan painted brad, to the strip. Glue the strip overlapping the seam between the two papers.
2) Mat the "Thinking of" punch-out on black glimmer and glue over the top of the card front. Add a black brad to the top of the "U" tag punch-out and foam tape the tag at an angle over the bottom right corner of "Thinking of".
3) Inside: Glue a 1"-wide strip of tan striped paper (stripes running horizontally) even with the card fold. Glue a 3/8"-wide strip of black glimmer over the right edge of the striped strip. Add a tan mini brad to the top of the "Wishing you a day..." tag punch-out and glue it over the top of the black glimmer strip. Foam tape the "treasures" punch-out below the tag.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- 5"x6 1/2" blank white card
- black ink pad
- foam tape


Party!
Project: Card
1) Place the card with the fold on the left and trim to 3 1/2" wide. Glue the "happy" and "birthday" punch-outs across the bottom of a 3 1/4"x6 1/4" piece of red/black gingham paper. Add a white painted brad to the right end of the "happy" punch-out, then glue the paper centered on the card front.
2) Glue black/white gingham ribbon across the top of the card front, trimming the excess even with the card edges. Mat the "Party" punch-out on white vellum and glue over the ribbon. Zot(tm) a gingham bow over the bottom of the punch-out.
3) Inside: Add a black mini brad to each end of the "special" punch-out and glue it at the top of the card inside. Glue the "enjoy the great treats!" tag punch-out below and Zot(tm) a knot of gingham ribbon over the top of the tag.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- Cardmaker's Classic Ribbons
- 5"x6 1/2" blank white card
- black ink pad
- foam tape
- small Zots(tm)


Have A Joyful Day!
Project: Card
1) Place the card with the fold at the top and cover the card front with tan floral paper. Mat the left edge of the floral border punch-out on red "silk" paper. Glue the border down the left side of the card front, trimming any excess even with the card edges.
2) Trim the blue ribbon border punch-out to 5" and add a red mini brad to each end. Glue the border over the right edge of the floral border.
3) Fold 2" of ribbon in half and secure the loose ends behind the top of the "Have a joyful day!" punch-out. Glue the punch-out over the right side of the card front and foam tape the large rose punch-out over the bottom right corner.
4) Inside: Mat a 3" square of tan floral paper on black glimmer. Glue the "happy birthday" punch-out at the top of the tan paper and the "best wishes" punch-out below. Glue the papers to the card inside. Foam tape a small rose punch-out at the bottom left corner of the "happy birthday" sentiment.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- Cardmaker's Classic Ribbons
- 5"x6 1/2" blank white card
- foam tape
- small Zots(tm)


Time for Your Birthday
Project: Card
1) Place the card with the fold at the top and glue a 6 1/4"x4 3/4" piece of black words paper centered on the card front. Assemble one glassine envelope and glue it over the right side of the card front with the flap opening to the left. 
2) Glue a clock punch-out to the bottom left edge of the card front. Add a red mini brad over the dot on the "i" on the "Birthday" punch-out. Glue the punch-out at an angle with the right end tucked in the glassine envelope. Glue the "time for your" punch-out above the word "Birthday". Add a red arrow brad to another clock punch-out and glue it above "time for your".
3) Cut a strip of black diamonds off the diamond paper. Glue a red bracket punch-out over the strip and accent with two white mini brads. Glue the strip down the right side of the card front, overlapping the glassine envelope, and trim any excess even with the card edges.
4) Inside: Cut a 1 3/4"-wide strip of black textured paper. Glue a red bracket punch-out over the strip and accent with two white mini brads. Glue the strip down the left edge of the card inside.
5) Add a red mini brad to the tab on the "enjoy your special day!" tag punch-out. Glue the tag with the left end overlapping the top right edge of the paper strip. Glue the "congratulations" punch-out across the bottom of the card inside.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- 5"x6 1/2" blank white card
- glue stick


Celebrate, Wishes
Project: Card
1) Place the card with the fold on the left, trim the card to 5" square and ink the edges. Ink the edges of a 4 1/2" square of tan floral paper, then mat on black paper and glue centered on the card front. Ink the edges of a 5"x2" piece of tan script paper and glue it across the card front. 
2) Assemble one glassine envelope. Write "friend" on the right end of the tan floral label cut-out and attach it over the front of the glassine envelope with a black mini brad in each end. Add a tan painted brad to the center of a black silk flower and Zot(tm) it in the bottom right corner of the label.
3) Run black ribbon through the slots on the birthday words slide, folding the ribbon around the top edge and securing it to the back side to form a loop. Mat the slide on black glimmer and slip it in the glassine envelope.
4) Inside: Ink the edges of a 1 3/4"-wide strip of tan floral paper and glue it down the left side of the card inside, trimming the excess even with the card edges. Glue a 2 1/4"x2" piece of black glimmer over the bottom right edge of the strip, then glue the "wishes" and "celebrate" punch-outs over the black glimmer.
Supplies:
- Cardmaker's Classic Creative Pack
- Cardmaker's Classic Instant Card Art
- Classic Creative Kit
- Cardmaker's Classic Ribbons
- 5"x6 1/2" blank white card
- black pen
- black ink pad
- small Zots(tm)