Ladybug Thank You
By: LeNae Gerig

Click to view large image

Designer's Tip: Thread buttons with thin strips of white scrap paper, gluing the ends to the back.

Instructions

1. Place the card fold on the top. Mat the green gingham die cut paper with black cardstock, leaving a 1/16” border. Glue to the card center. Mat the ladybug paper with black, leaving a 1/16” border. Glue 3 5/8” of the paper 5/8” from the left edge and flush with the card top. Trim the paper flush with the card edge.
2. Foam tape the large ladybug die to the center of the ladybug paper. Zotä a small blue bow to the top left.
3. Glue a length of blue ribbon down the right side of the card. Evenly space and foam tape the 2 small ladybug and the “Thank You” dies down the ribbon.
4. Inside: Glue the cut away portion of the ladybug paper flush with the right side of the card. Glue a large red button to the edge of the paper.

Supplies: (Find these supplies and more at www.paperwishes.com)

• Celebrations Card Kit (link)
• Black cardstock (link)
• foam tape (link)
• Zots™ Adhesive Dots (link)

Back to Gallery

Click here for a printer friendly version