Get all the major supplies needed to make this project with the Thanks Card bundle or you can order them separately.
LeNae's Tip: After sprinkling flocking onto glue, press the flocking into the adhesive, using your fingertips, to insure better coverage.
Flocked "Thanks" card
By LeNae Gerig
- With the card fold at the top, cover 2 of the cards right side with lavender circle paper. Cover the remaining portion of the card front with lavender/aqua/lime striped paper.
- Use the glue stamp pad to stamp a small solid arrow 2 from the right edge and 2 from the top. Flock with the purple, and let it dry. Stamp arrows on aqua and lime tags. Flock, let dry and add mini brads. Write thanks inside the outlined arrow. Foam tape the tags to the card front.
- Apply glue around the edges of a large slide mount innie. Flock and let dry, leaving the center clear for foam tape and adhere the gratitude cut-out. Secure a mini brad to the top of the large tag, add the "gratitude" cut-out and glue to the right side of the card.
- Inside the card: Cut a 3x4 rectangle of striped paper and glue to the inside back. Journal on a tag and glue to the center. Secure a lime brad at the top of the tag.