Etched Heart Necklace

Ann Bernklau

Get all the major supplies needed to make this project with the Etched Projects Set, or you can order them separately.

Etched Heart Necklace
By Ann Bernklau

Click to Enlarge

Designer Tip: When placing the small Jewel Dazzles, I peel them off the sheet with the tip of my X-acto® knife, placing my finger gently over the jewel to prevent it from popping off and getting lost (which does happen).



  1. Place the large heart Dazzles in the center of the 2"x2" slide, making sure all parts are pressed down. Place pieces of the swirly border Dazzles over the corners of the glass. Trim the Dazzles flush with the glass. Using gloves, paint on a thick, even layer of etching cream covering the glass. Let set for 10 minutes, then rinse off with water and dry with a paper towel. If some areas remain un-etched, repeat the process. Carefully peel off the Dazzles.
  2. Place the etched glass and a blank slide together in the metal frame and press the metal tab to close. String the pendant on a silver bead chain. Add small red Jewel Dazzles around the heart and the metal frame for a touch of color.