Valentine Ornament

LeNae Gerig

Valentine Ornament
By LeNae Gerig

Click to Enlarge

Designer’s Tip: The gold metal leaf will only stick to the exposed areas of adhesive behind the Pink Swirly Hearts Dazzles™.



  1. Peel one side of backing from double sided adhesive and place a medium Pink Swirly Hearts Dazzles™ on the adhesive. Cut out around the heart, carefully lifting up the swirl and cutting under them.
  2. Place small pieces of the Gold Metal Leaf Sheets on the exposed adhesive behind the Pink Swirly Hearts Dazzles™. Use your fingertips to pat the gold leaf in place so that the gold sticks to the adhesive. Use the dry paintbrush to dust away the excess gold that is loose.
  3. Peel the backing from the opposite side of the heart and place on the front of the glass disc. Place a small Pink Swirly Hearts Dazzles™ on either side of the heart bottom. Place the Dazzles™ border on the sides of the disc, starting at the top, under the cap and ending at the opposite side.
  4. Use 3/8” wide Hopscotch white glitter ribbon to make a bow and Zot( to the ornament cap. Thread an 8” length of ribbon through the disc hanger and knot the ends.