Golden Lattice Card

Gail Booth

Golden Lattice Card
By Gail Booth

Click to Enlarge

Designer Tip: Leave part of the stencil area untouched for the Dazzles™ greeting.



  1. Card front: Place a blank card with the fold on your left. Cover with On Butterfly Wings black ivy paper. Remove the backing from strips of diamond glitter tape and place 3/8” from each card edge, trimming even with edges.
  2. Place the woven lattice stencil on the bottom left corner of 4”x5½” black cardstock and tape in place. Use the mini squeegee to apply embossing paste through the stencil, starting at the bottom left corner and moving along the left side and the bottom. Leave the upper right area without paste, as shown. Remove the stencil and sprinkle with the two metallic mica powders, concentrating the orange on the left and bottom edges. Shake off the excess and heat the paste with the heat gun until bubbly and dry. Brush off the excess powder with a paint brush.
  3. Tie a length of ¼” white sheer ribbon across the lower third of the piece and tie a bow on the left as shown. Foam tape the piece centered on your card. Place silver “Thank You” Dazzles™ on the upper right corner.