Sending Warm Thoughts Card

Susan Cobb

Sending Warm Thoughts Card
By Susan Cobb

Click to Enlarge

Designer’s Tip: These metal corners are perfect for framing a greeting on your card.



  1. Place the card with the fold at the top and trim to 5”x4”. Place a sheet of Trail Blazer brown/green/aqua leaves border paper with the border on the left side. Use the bottom left corner of the leaves border to cover the card. Cut a 5”x3/4” green/aqua patterned paper and ink the edges with Fudge ink. Glue it across the card, 1 3/4" from the bottom. Ink the edges of the card.
  2. Use the Design Tool Double Bracket Label template to trace the shape onto Trail Blazer light green textured paper. Remove the template and cut it out. Mat the label on Trail Blazer wood grain paper with 1/16” borders. Foam tape the label centered on the green/aqua patterned paper strip. Cut out 2 small heart-shaped leaves from the remaining leaves border paper and ink the edges with Fudge ink. Overlap the 2 leaves and glue/foam tape them on the lower left edge of the label as shown.
  3. Place a vine metal corner on each end of the label. Ink Dazzles™ “Sending warm Thoughts” and 3 butterflies with Fudge ink and let dry. Repeat for darker color and let dry. Place the words centered on the label inside the metal corners. Use 1/2" wide brown grosgrain ribbon to tie a bow. Zot™ the bow on the lower right edge of the label.