Hello Card

Susan Cobb

Hello Card
By Susan Cobb

Click to Enlarge

Designer Tip: Place your card with the fold on the left. Cover the top 3” of the card with aqua patterned paper. Cover the bottom with purple/pink flowers paper. Cut a 1/2" wide strip of purple paper and ink the edges. Glue across the card, even with the top edge of the floral paper. Ink outer edges of the card. Back the pink border die cut with purple patterned paper and foam tape across the bottom of the card. Glue 1/8” wide aqua grosgrain ribbon even with the bottom edge. Apply foam tape to the back of the large pink frame die cut with square center and place it on yellow dots paper. Trim the edges from beneath the frame so the yellow dots paper only shows through the center of the frame. Glue it centered on the card, 1/4" from the top. Ink the edges of the 2 large butterfly die cuts and lightly fold the wings together on each. Foam tape the body of each on the right side of the yellow dots paper inside the frame, angled as shown. Glue/foam tape the pink/yellow/aqua tag die cut on the left side of the frame. Cut out the “Hello” tag and foam tape onto the top of the larger tag as shown. Ink the edges of the purple/yellow tiny butterfly die cut, fold the wings together and foam tape the body angled onto the larger tag as shown. Use 3/4" purple crepe ribbon to tie a bow. Trim the ends into a “V”. Zot™ on the top of the tags as shown. Inside: Glue remaining pink border backed with purple even with the bottom edge of the card, trimming excess as needed. Add ribbon even with the bottom edge as on the front. Cut a 5”x1”purple/pink flowers paper and mat long sides on light pink paper with 1/16” borders. Ink the edges and glue centered across the inside. Glue the aqua scalloped label die cut centered on the paper. Cut out the “Wishing you a BEAUTIFUL DAY!” label and glue it centered on the label. Ink the edges of the small aqua/purple butterfly and glue it angled on the edge of the words label. Zot™ knotted ribbon as shown.