50/50 Fridays: Over 50 items at 50% off beginning each Friday for one week. What will they be?
 

Share this:



“Smile” Card


Susan Cobb

“Smile” Card
By Susan Cobb


Click to Enlarge

Designer Tip: 1) Cover your card with Twilight Jewels pink flourishes paper. Cut a 4 1/4"x4” Twilight Jewels purple/pink diamonds paper and mat on Silver Triple Finish glitter sheet, with 1/16” borders. Glue it centered on the card, 1 1/2" from the bottom. Cut a wide strip from Twilight Jewels striped paper and mat the top edge on Silver Triple Finish brushed sheet, with a 1/8” border. Glue it even with the bottom of the card. Repeat with a narrow strip at the top. Place White Jewel Border Dazzles™ across the card as shown. 2) Place the triple folded cardstock beneath the precision base plate in the sandwich for your die cutting machine. Cut a piece of Silver Triple Finish glitter sheet slightly larger than the Twilight Jewels Frame cutting die. Place the glitter sheet face up on the precision base plate with the cutting die face down on the glitter sheet. Add the clear plate and pull it through your machine. For the silver mirror center scalloped opening, use the cutting die in the same manner with a piece of the silver mirror sheet (tip-if your clear plate has impressions on it, you may need to add a thin piece of paper between the silver mirror material and the cutting die so the mirror material will remain smooth). 3) Place the glitter die-cut centered on the purple/pink diamonds paper on the card. Remove the backing on the mirror die-cut and place it inside the frame. Now remove the backing from the glitter frame and place it on the paper, aligning the center area with the mirror die-cut. Add Dazzles™ word on the center. Zot™ bow in place.

Supplies: