Susan's Slide Mount Card

Ask designer Susan Cobb what her favorite paper crafting supply is right now and shell tell you: Slide mounts! I love them!

Susan says one of her favorite techniques is to cover the slide mount with paper, then glue it to frame a window cut into the front of her card. I cover the slide mount with paper, trimming around both inner and outer edges with an X-acto knife. Then I cover a blank card front with coordinating paper and cut a window in the center of the card front. The slide mount gets glued to over the window to frame it. Glue an embellishment to the inside of the card so it shows through the front window and you have an instant focal point for your card.

Want to try Susans technique for yourself? Take a look at her pretty Dreams card and these tips to see exactly how she did it.


Cardmakers Part not in database (may have been discontinued): #7234
Cardmakers Definitions Card Quotes
Cardmakers Earth Tones Ribbons
Cardmakers Jumbo Slide Mounts
Cardmakers Large Square Slide Mounts
Cardmakers Gold & Silver Mini Clips
Chalks: Part not in database (may have been discontinued): #pn860007
5x6 1/2 blank card
X-acto knife
cutting mat
stick glue

Place the card with the fold at the top, then trim only the card front from 5 down to 4 1/4. Cover the card front with brown leaves paper. Tear the left edge of a 3 1/2x 4 1/4 piece of dream paper and glue it to the right side of the card front. Cover a jumbo slide mount with tan canvas paper and a large slide mount with brown canvas paper.

Use the X-acto and cutting mat to cut a 2 1/4 square window in the card front. Glue the jumbo slide mount over the window, leaving the bottom left corner unglued. Center the large slide mount inside the window and attach it to the jumbo slide mount with two clips as shown.

Cut out the quote and chalk it brown and tan. Mat it on tan vellum, then glue it to the card front tucked under the slide mount. Attach a clip to the left side. Glue a length of ribbon to the right edge as shown, trimming the ends even with the card. Tie a small length of ribbon around it.

For the inside: Place the fold at the top and open the card. Cover just the bottom half of the card with canvas paper. Cut a 6 1/2x1/4 strip of burlap paper and glue it even with the bottom edge of the card inside. Cut a 1 3/4 square of dream paper and double-mat it on burlap and vellum. Glue it centered on the card inside.

Another great thing about slide mounts? Susan says: Paper slide mounts dont add bulk, weight, or rough edges to your projects, so theyre great for putting on a card thats being mailed.

Susan Cobb is a scrapbook page designer for Hot Off The Press and the author of Susans Paper Engineering Secrets and a co-author of Cardmakers Idea Book.